The LED strips and the driver are MAGNETIC backed, so they literally attach themselves to the troffer body without the need to drill holes or screws in. This product is perfect for do-it-yourself lighting projects! The high efficiency driver and LED strips give much higher lumens per watt and overall lower system wattage than relamping a T8 fixture with LED Tubes.
This retrofit kit installs in 3 or 4 minutes with only your bare hands. Just pop off the ballast cover, disconnect power from the ballast, connect power to the LED driver, and plug in the LED strips. It is that Simple!
The special thermally conductive magnet attaches the kit both physically and thermally to the troffer or strip light, allowing for easy heat dissipation away from the components. The entire body of the troffer becomes the heat sink for the strips, making them operate extremely cool, which dramatically extends their lifespan.
|Initial Lumens (lm)||2,550 lm|
|System Power (Watts)||20 w|
|Color Temperature (degrees Kelvin)||4,000K|
|Efficency (lumens/watt)||>150 lm/w|
|L70 Test||>50,000 hours|
|LED Type||Philips Lumileds Luxeon 3030|
|Voltage||90-277v, 50- 60 Hz|
|Operating Temperature||-40ºC to 50ºC|
Jump Supply © 2016